What does 11/16 convert to in metric?
Conversion table inches to mm
| Dimensions — Inches to Metric | ||
|---|---|---|
| 0.688” | 11/16” | 17.48 mm |
| 0.750” | 3/4” | 19.05 mm |
| 0.813” | 13/16” | 20.65 mm |
| 0.875” | 7/8” | 22.23 mm |
Also, Is 24mm and 15 16 the same?
23mm = 29/32 inch. 24mm = just over 15/16 inch.
Accordingly, What is an inch and 3/8 in metric?
Fractional Inches to Decimal Inches and Metric Millimeters
| Inches | Metric | |
|---|---|---|
| Fractional | Decimal | mm |
| . | 0.3740 | 9.5000 |
| 3/8 | 0.3750 | 9.5250 |
| 25/64 | 0.3906 | 9.9219 |
What is equivalent to a 15 mm wrench? 15mm
| Bolt Diameter | Wrench Size (Standard) | Wrench Size (Metric) |
|---|---|---|
| 3/8″ | 9/16″ | 15mm |
| 7/16″ | 5/8″ | 16mm |
| 1/2″ | 3/4″ | 19mm |
| 9/16″ | 13/16″ | 21mm |
Feb 27, 2020
What metric and SAE sizes are the same?
While there is no precise correlation between SAE fractional and metric measurements, there are many sockets that are close enough in size to be used interchangeably, in some circumstances. For example, 5/16 and 8 mm, 7/16 and 11 mm, 5/8 and 16 mm, 3/4 and 19 mm, 7/8 and 22 mm, and 15/16 and 24 mm.
16 Related Questions Answers Found
Is a 3/8 socket the same as a 10mm?
The equivalent imperial size of a 10mm socket is a 3/8 socket.
How thick is 3mm?
| MM | Approximate Size In Inches | Exact Size In Inches |
|---|---|---|
| 1mm | 1/25 Inch | 0.03937 Inches |
| 2mm | 1/16 Inch | 0.07874 Inches |
| 3mm | 3/32 Inch | 0.11811 Inches |
| 4mm | 1/8 Inch | 0.15748 Inches |
What are the most common metric wrench sizes?
What are the most common metric wrench sizes?
- Most common are the 1/4-inch, 3/8-inch and ½-inch ratchet drivers, but ¾-inch and 1-inch sets are available for heavy-duty work.
- Also Know, what are the standard wrench sizes?
What is 30mm in standard?
30mm is 1.18″. That would be about a 1 3/16″ SAE size.
How many inches is 9 16?
Decimal equivalents of eights, sixteenths, thirty-seconds and sixty-fourths of an inch
| Inches | |
|---|---|
| fractional | decimal |
| 7/16 | 0.4375 |
| 9/16 | 0.5625 |
| 11/16 | 0.6875 |
What are the standard wrench sizes?
Wrenches: Standard Combination Wrenches (1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1) Metric Combination Wrenches (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19) Standard Flare Nut Wrenches (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 7/8) Note: Each wrench may combine two sizes.
What are the standard socket sizes smallest to largest?
Metric Socket Sizes Chart
| 1/4” Drive | 3/8” Drive | 1/2” Drive |
|---|---|---|
| 6mm | 9mm | 12mm |
| 7mm | 10mm | 13mm |
| 8mm | 11mm | 14mm |
| 9mm | 12mm | 15mm |
•
Jun 15, 2020
Should I buy SAE or metric?
Some trucks used the metric system of fasteners while some cars used both metric and SAE fasteners. … So, you don’t need to buy SAE tools to accomplish your most jobs. This is the reason, I mostly recommend filling up your socket set with metric tools and then choose any SAE tools if you think you need to.
Do you need both SAE and metric?
If you’re going to be working on both types of cars, foreign and domestic, you will need both SAE sockets and metric sockets. However, the general trend is moving away from SAE fasteners and more companies are going 100% metric.
Does Honda use SAE or metric?
Registered. All fasteners on almost all modern cars are metric. Yours are all metric, Honda has always been metric.
What’s a size bigger than 3 8?
What is the next size up from 3 8?
| Bolt Diameter | Wrench Size (Standard) | Wrench Size (Metric) |
|---|---|---|
| 1/4″ | 7/16″ | 11mm |
| 5/16″ | 1/2″ | 13mm |
| 3/8″ | 9/16 ” | 15mm |
| 7/16″ | 5/8″ | 16mm |
May 5, 2020
Are all 10mm bolts the same?
You can have a 10mm head on different sized bolts. Remove the bolt and bring it with you to the hardware store when you go to buy the new one, and test it on various nuts to see what size it is. You have to watch out because metric bolts in the appropriate size (probably M6 or so) come with different thread pitches.
What are standard socket sizes?
There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters). In-between sizes are available too, starting with 1/4 inch (0.6 centimeters) and increasing every sixteenth of an inch (0.16 centimeters).
Should I buy SAE or metric wrenches?
Some trucks used the metric system of fasteners while some cars used both metric and SAE fasteners. … So, you don’t need to buy SAE tools to accomplish your most jobs. This is the reason, I mostly recommend filling up your socket set with metric tools and then choose any SAE tools if you think you need to.
What is difference between SAE and metric?
The difference between Metric and SAE sockets is similar to the difference between yards and meters. Metric fasteners are (generally) used on imported cars, and SAE fasteners are (generally) used on domestic (USA) made cars. … SAE, or standard size, use the imperial measurement system we invented in the USA.
Is 3mm bigger than 5mm?
3mm = almost 1/8 inch. 5mm = just over 3/16 inch.
How thick is a 2mm chain?
2mm is approximately equal to 1/16 inch.
How many mm means 1 inch?
1 inch is equal to 25.4 millimeters, which is the conversion factor from inches to millimeters.
What are the standard metric wrench sizes?
Metric Combination Wrenches (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19) Standard Flare Nut Wrenches (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 7/8) Note: Each wrench may combine two sizes.
Are Toyotas standard or metric?
Toyotas are JIS metric as opposed to DIN (German) or American metric, (ISO).
ncG1vNJzZmiZlKG6orONp5ytZ6edrrV5w6icrGVhZnpygoycpqeulafBbsDOZqCnZZ2awbO1wmg%3D